How It Works

First, up to a pound bait is placed inside inner basket.

The inner basket is inserted inside the outer housing. The O-Ring is seated with a slight twist to ensure a watertight seal

The inner basket is inserted inside the outer housing. The O-Ring is seated with a slight twist to ensure a watertight seal

The pot is then baited normally and the Longsoaker is suspended in the pot or trap on a pre-installed retention strap. This strap ensures the container will open properly and not interfere with operation of the pot.  The tabs are quickly and easily inserted into the bungee cord loops. The pot or trap is now ready to be set.

The galvanic release starts to corrode as soon as it hits salt water.  Once the original bait is worn out or gone, the galvanic release breaks and causes the Longsoaker to open therefore essentially re-baiting the gear.